From 1d69c4b7da499b1d80b47fda9b275a795a8a7063 Mon Sep 17 00:00:00 2001
From: aijinhui <aijinhui>
Date: 星期三, 18 十月 2023 11:45:03 +0800
Subject: [PATCH] 实体类
---
lib/mediamtx/mediamtx.yml | 77 +++++++++++++++++++-------------------
1 files changed, 38 insertions(+), 39 deletions(-)
diff --git a/lib/mediamtx/mediamtx.yml b/lib/mediamtx/mediamtx.yml
index 4be3390..9dfc5b5 100644
--- a/lib/mediamtx/mediamtx.yml
+++ b/lib/mediamtx/mediamtx.yml
@@ -1,6 +1,6 @@
###############################################
-# General parameters
+# General settings
# Sets the verbosity of the program; available values are "error", "warn", "info", "debug".
logLevel: info
@@ -13,10 +13,10 @@
readTimeout: 10s
# Timeout of write operations.
writeTimeout: 10s
-# Number of read buffers.
-# A higher value allows a wider throughput, a lower value allows to save RAM.
-readBufferCount: 512
-# Maximum size of payload of outgoing UDP packets.
+# Size of the queue of outgoing packets.
+# A higher value allows to increase throughput, a lower value allows to save RAM.
+writeQueueSize: 512
+# Maximum size of outgoing UDP packets.
# This can be decreased to avoid fragmentation on networks with a low UDP MTU.
udpMaxPayloadSize: 1472
@@ -40,7 +40,7 @@
# Enable the HTTP API.
api: yes
# Address of the API listener.
-apiAddress: 127.0.0.1:9997
+apiAddress: 192.168.1.227:9997
# Enable Prometheus-compatible metrics.
metrics: no
@@ -62,9 +62,9 @@
runOnConnectRestart: no
###############################################
-# RTSP parameters
+# RTSP settings
-# Enable support for the RTSP protocol.
+# Allow publishing and reading streams with the RTSP protocol.
rtsp: yes
# List of enabled RTSP transport protocols.
# UDP is the most performant, but doesn't work when there's a NAT/firewall between
@@ -102,9 +102,9 @@
authMethods: [basic]
###############################################
-# RTMP parameters
+# RTMP settings
-# Enable support for the RTMP protocol.
+# Allow publishing and reading streams with the RTMP protocol.
rtmp: yes
# Address of the RTMP listener. This is needed only when encryption is "no" or "optional".
rtmpAddress: :1935
@@ -122,9 +122,9 @@
rtmpServerCert: server.crt
###############################################
-# HLS parameters
+# HLS settings
-# Enable support for the HLS protocol.
+# Allow reading streams with the HLS protocol.
hls: no
# Address of the HLS listener.
hlsAddress: :8888
@@ -178,9 +178,9 @@
hlsDirectory: ''
###############################################
-# WebRTC parameters
+# WebRTC settings
-# Enable support for the WebRTC protocol.
+# Allow publishing and reading streams with the WebRTC protocol.
webrtc: yes
# Address of the WebRTC listener.
webrtcAddress: :8889
@@ -206,36 +206,36 @@
# STUN servers are used to obtain the public IP of server and clients. They are
# needed when server and clients are on different LANs.
# TURN/TURNS servers are needed when a direct connection between server and
- # clients is not possible. All traffic is routed through them. stun:stun.l.google.com:19302
-- url: stun:192.168.1.15:3478
+ # clients is not possible. All traffic is routed through them.
+- url: stun:stun.l.google.com:19302
# if user is "AUTH_SECRET", then authentication is secret based.
# the secret must be inserted into the password field.
username: ''
password: ''
# List of public IP addresses that are to be used as a host.
# This is used typically for servers that are behind 1:1 D-NAT.
-webrtcICEHostNAT1To1IPs: []
+webrtcICEHostNAT1To1IPs: [192.168.1.227]
# Address of a ICE UDP listener in format host:port.
# If filled, ICE traffic will pass through a single UDP port,
# allowing the deployment of the server inside a container or behind a NAT.
-webrtcICEUDPMuxAddress:
+webrtcICEUDPMuxAddress: 192.168.1.227:8189
# Address of a ICE TCP listener in format host:port.
# If filled, ICE traffic will pass through a single TCP port,
# allowing the deployment of the server inside a container or behind a NAT.
-# Setting this parameter forces usage of the TCP protocol, which is not
+# Using this setting forces usage of the TCP protocol, which is not
# optimal for WebRTC.
-webrtcICETCPMuxAddress:
+webrtcICETCPMuxAddress: 192.168.1.227:8189
###############################################
-# SRT parameters
+# SRT settings
-# Enables support for the SRT protocol.
+# Allow publishing and reading streams with the SRT protocol.
srt: yes
# Address of the SRT listener.
srtAddress: :8890
###############################################
-# Path parameters
+# Path settings
# These settings are path-dependent, and the map key is the name of the path.
# It's possible to use regular expressions by using a tilde as prefix,
@@ -245,25 +245,24 @@
# another entry.
paths:
all:
+ ###############################################
+ # General path settings
+
# Source of the stream. This can be:
- # * publisher -> the stream is published by a RTSP, RTMP, WebRTC or SRT client
+ # * publisher -> the stream is provided by a RTSP, RTMP, WebRTC or SRT client
# * rtsp://existing-url -> the stream is pulled from another RTSP server / camera
# * rtsps://existing-url -> the stream is pulled from another RTSP server / camera with RTSPS
# * rtmp://existing-url -> the stream is pulled from another RTMP server / camera
# * rtmps://existing-url -> the stream is pulled from another RTMP server / camera with RTMPS
- # * http://existing-url/stream.m3u8 -> the stream is pulled from another HLS server
- # * https://existing-url/stream.m3u8 -> the stream is pulled from another HLS server with HTTPS
+ # * http://existing-url/stream.m3u8 -> the stream is pulled from another HLS server / camera
+ # * https://existing-url/stream.m3u8 -> the stream is pulled from another HLS server / camera with HTTPS
# * udp://ip:port -> the stream is pulled with UDP, by listening on the specified IP and port
- # * srt://existing-url -> the stream is pulled from another SRT server
- # * whep://existing-url -> the stream is pulled from another WebRTC server
- # * wheps://existing-url -> the stream is pulled from another WebRTC server with HTTPS
+ # * srt://existing-url -> the stream is pulled from another SRT server / camera
+ # * whep://existing-url -> the stream is pulled from another WebRTC server / camera
+ # * wheps://existing-url -> the stream is pulled from another WebRTC server / camera with HTTPS
# * redirect -> the stream is provided by another path or server
# * rpiCamera -> the stream is provided by a Raspberry Pi Camera
source: publisher
-
- ###############################################
- # General path parameters
-
# If the source is a URL, and the source certificate is self-signed
# or invalid, you can provide the fingerprint of the certificate in order to
# validate it anyway. It can be obtained by running:
@@ -283,7 +282,7 @@
maxReaders: 0
###############################################
- # Authentication path parameters
+ # Authentication path settings
# Username required to publish.
# SHA256-hashed values can be inserted with the "sha256:" prefix.
@@ -304,7 +303,7 @@
readIPs: []
###############################################
- # Publisher path parameters (when source is "publisher")
+ # Publisher path settings (when source is "publisher")
# allow another client to disconnect the current publisher and publish in its place.
overridePublisher: yes
@@ -313,7 +312,7 @@
fallback:
###############################################
- # RTSP path parameters (when source is a RTSP or a RTSPS URL)
+ # RTSP path settings (when source is a RTSP or a RTSPS URL)
# protocol used to pull the stream. available values are "automatic", "udp", "multicast", "tcp".
sourceProtocol: automatic
@@ -333,13 +332,13 @@
rtspRangeStart:
###############################################
- # Redirect path parameters (when source is "redirect")
+ # Redirect path settings (when source is "redirect")
# RTSP URL which clients will be redirected to.
sourceRedirect:
###############################################
- # Raspberry Pi Camera path parameters (when source is "rpiCamera")
+ # Raspberry Pi Camera path settings (when source is "rpiCamera")
# ID of the camera
rpiCameraCamID: 0
@@ -421,7 +420,7 @@
rpiCameraTextOverlay: '%Y-%m-%d %H:%M:%S - MediaMTX'
###############################################
- # external commands path parameters
+ # External commands path settings
# Command to run when this path is initialized.
# This can be used to publish a stream and keep it always opened.
--
Gitblit v1.9.3